Fortinet/CLI: Unterschied zwischen den Versionen

Version vom 30. Dezember 2016, 09:57 Uhr

CLI

Policy

config firewall policy
    edit 81
        set srcintf "port1"
        set dstintf "wan1"
        set srcaddr "Netz1" "Netz 2" "Netz ..."
        set dstaddr "Netz - DST"
        set action ipsec
        set schedule "always"
        set service "ALL"
        set logtraffic all
        set natip 10.x.y.0 255.255.255.0
        set comments "ACHTUNG NAT-Adresse via CLI hinzugefuegt"
        set outbound enable
        set natoutbound enable
        set vpntunnel "PH1NAME"
    next
end

config firewall policy
    edit 238
        set srcintf "port7"
        set dstintf "wan1"
        set srcaddr "NETZ SRC"
        set dstaddr "Netz DST"
        set action ipsec
        set schedule "always"
        set service "ALL"
        set logtraffic all
        set natip 10.x.y.0 255.255.255.0
        set comments "Outbound NAT!  set natip 10.x.y.0 255.255.255.0"
        set inbound enable
        set outbound enable
        set natoutbound enable
        set vpntunnel "PH1NAME"
    next
end