Fortinet/CLI: Unterschied zwischen den Versionen
Aus SchnallIchNet
Cbs (Diskussion | Beiträge) |
Cbs (Diskussion | Beiträge) |
||
Zeile 44: | Zeile 44: | ||
end | end | ||
</pre> | </pre> | ||
+ | |||
+ | |||
+ | === Packet Capture === | ||
+ | |||
+ | diag sniffer packet "<interface-name|any>" "host <IP> and port 3389" 4 | ||
+ | |||
+ | 4 = verbose level (1-6) | ||
+ | |||
+ | [http://docs-legacy.fortinet.com/frec/admin_hlp/1-1-0/index.html#page/FortiRecorder_Help/packet_capture.html Fortinet-Docu] |
Version vom 11. Januar 2017, 13:40 Uhr
Inhaltsverzeichnis
CLI
Policy
config firewall policy edit 81 set srcintf "port1" set dstintf "wan1" set srcaddr "Netz1" "Netz 2" "Netz ..." set dstaddr "Netz - DST" set action ipsec set schedule "always" set service "ALL" set logtraffic all set natip 10.x.y.0 255.255.255.0 set comments "ACHTUNG NAT-Adresse via CLI hinzugefuegt" set outbound enable set natoutbound enable set vpntunnel "PH1NAME" next end config firewall policy edit 238 set srcintf "port7" set dstintf "wan1" set srcaddr "NETZ SRC" set dstaddr "Netz DST" set action ipsec set schedule "always" set service "ALL" set logtraffic all set natip 10.x.y.0 255.255.255.0 set comments "Outbound NAT! set natip 10.x.y.0 255.255.255.0" set inbound enable set outbound enable set natoutbound enable set vpntunnel "PH1NAME" next end
Packet Capture
diag sniffer packet "<interface-name|any>" "host <IP> and port 3389" 4
4 = verbose level (1-6)