Ssh: Unterschied zwischen den Versionen

Aus SchnallIchNet
Wechseln zu: Navigation, Suche
 
(7 dazwischenliegende Versionen desselben Benutzers werden nicht angezeigt)
Zeile 1: Zeile 1:
==.ssh/authorised_keys==
+
== ssh ==
wenn man ein key-based auth verwendet, kann man einem key in dieser datei einen '''command''' voranstellen:
+
 
 +
useful ssh client options...
 +
 
 +
 
 +
=== ciphers ===
 +
 
 +
to tear down encryption when e.g. pushing/pulling backups through you own networks<br/>
 +
set a low (unsecure) encryption cipher, e.g. to:
 +
 
 +
-c arcfour
 +
 
 +
which had best test results of about 10MB/s transferrate...
 +
or
 +
 
 +
-c blowfish
 +
 
 +
which results in about 9.5MB/s transferrate <br/>
 +
also good
 +
 
 +
 
 +
== ssh-keygen ==
 +
 
 +
mit ssh-keygen werden ssh-schluessel erstellt, bearbeitet oder konvertiert.
 +
 
 +
 
 +
=== password aendern ===
 +
 
 +
ssh-keygen -p -f id_rsa
 +
 
 +
 
 +
== .ssh/authorised_keys ==
 +
 
 +
wenn man ein key-based auth verwendet, kann man einem key in der authorized_keys einen '''command''' voranstellen:
 +
 
 
<pre>
 
<pre>
 
command="/usr/bin/AllowedCommand" ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAQE
 
command="/usr/bin/AllowedCommand" ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAQE
Zeile 10: Zeile 43:
 
  root@Nagios
 
  root@Nagios
 
</pre>
 
</pre>
 +
 
dies bewirkt dass der besitzer des private key ausschliesslich dieses commando ausfuehren kann.
 
dies bewirkt dass der besitzer des private key ausschliesslich dieses commando ausfuehren kann.
 
aber kein anderes und auch keine shell bekommt...
 
aber kein anderes und auch keine shell bekommt...
 +
  
 
==Siehe auch==
 
==Siehe auch==
===SshFS===
+
 
{{:Sshfs}}
+
* [[Ssh/fs|sshfs]]
===SshTunnel===
+
* [[Ssh/tunnel|tunneling with ssh]]
{{:Sshtunnel}}
+

Aktuelle Version vom 30. November 2012, 09:50 Uhr

ssh

useful ssh client options...


ciphers

to tear down encryption when e.g. pushing/pulling backups through you own networks
set a low (unsecure) encryption cipher, e.g. to:

-c arcfour 

which had best test results of about 10MB/s transferrate... or

-c blowfish

which results in about 9.5MB/s transferrate
also good


ssh-keygen

mit ssh-keygen werden ssh-schluessel erstellt, bearbeitet oder konvertiert.


password aendern

ssh-keygen -p -f id_rsa


.ssh/authorised_keys

wenn man ein key-based auth verwendet, kann man einem key in der authorized_keys einen command voranstellen:

command="/usr/bin/AllowedCommand" ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAQE
A06ssYDmr5eWxbp+piT4vyPBO3qYsk9ZsagAgZ4ygmGQzSZr9yxaZSkUFFXJvkwZuRVPI
U5UITBi3Whvh2y5Ajm91+M5qKwXeakrJ49GlsyuLfzYr7onttfP0cleLQuLLrf5Pxly1g
yaDMN2esPDkngl/XplvaWJQDmQAAQmgMzYig+J+xGHESU9IomUHSZ/oju5xiFVVA+gLMg
6BWPnYDA2zwGLuYZmeRdw+qJN4Mg6jiD5XQPqBVSI+zlcyFbaAz2EVlLEIRmx1nPOtVb/
SdxNr7VEYkted6WDXmm6KYMvnzWtJCe8mdIgNhCKd4pFKniJNUUhtK7GFiaF3/agJyQ==
 root@Nagios

dies bewirkt dass der besitzer des private key ausschliesslich dieses commando ausfuehren kann. aber kein anderes und auch keine shell bekommt...


Siehe auch